|
|
ITS
TELECOM - CGW-I ISDN GSM Gateway (ISDN2e)
| CGW-I:
BRI to GSM
Cut your business
phone costs by connecting your ISDN telephone system directly to
GSM cellular networks.
The CGW-I is
a BRI to GSM Cellular Gateway that lets you call cellular numbers
from your ISDN telephone system, benefiting from low business tariffs,
bypassing your landline carrier and eliminating interconnection
fees.
The CGW-I is
your transparent and low cost solution for calls to GSM mobile phones:
- Fast
ROI (Return On Investment)
- Available
with 2 GSM channels
- Supports
worldwide GSM frequencies
|
|
|
Incoming
and Outgoing Call Features
- Intelligent
Routing – Return up to 1,500 mobile calls directly to the
calling DDI (Direct Dial-In). CGW-I stores the link between the
dialing extension and the dialed cellular number. When a missed
mobile call is returned, CGW-I recognizes the Caller ID and routes
the caller to the dialer’s extension.
- MSN Routing
– Route incoming cellular calls to default Multi-Subscriber
Number (MSN), such as a specific extension, Automated Attendant
or Voice Mail system.
- Call Barring
– Dedicate your SIM to handle only incoming calls, outgoing
calls, or both.
- Call Diversion
– Automatically reroute incoming calls to an alternate channel
when SIM is busy.
- Toll Restrictions–
Define which cellular operator prefixes to allow the CGW-I to
call and which ones not to allow.
- Redirect
Calls – Override Toll Restrictions and set up a cross-network
connection.
- Call Duration
– Limit the length of calls to protect you from connections
that are accidentally left open.
System
Management & Monitoring
- Full Device
Control – Configure system parameters and view system status
levels directly from your PC with included user-friendly Windows-based
utility program.
- Alarms–
Set thresholds to trigger selected SMS and Email alarms.
- Statistics
– View Reception Level and each SIM card’s accumulated
traffic.
- CDR–
Call Detail Recording log for up to 2,500 records.
- Balance Call
Distribution – Evenly distribute call traffic sent to each
SIM.
Configurable
Controls & Maintenance
- CLIP / CLIR
– Display or hide SIM card numbers using Calling Line Identification
Presentation/Restriction setting.
- SIM PIN Control
– Protect each SIM within the CGW-I from unauthorized use
if removed.
- Network Lock
– Configure your CGW-I to work permanently with only a specific
operator.
- Roaming –
Allow calls to automatically connect to the strongest available
signal or restrict them to a specific network operator.
- Dialing Mode
Support – Overlap or En Block.
- End of Dialing
Digit – Reduce the time required to connect a dialed number.
- Gain Control
– Adjust volume levels for both incoming and outgoing calls
on each channel.
System
Specifications
- 2 Voice Channels:Each
with Integrated GSM Cellular Module (1 SIM per Channel)
- Indicator
LEDs: LAN Status (Line and Active), Module Status (2)
- Built-in
LCD: Verify Signal Strength, Operational Status and Cellular Operator
Name to simplify maintenance.
- ISDN Protocol
Support: EuroISDN (Standard, In Bound DTMF Dialing, France, Germany),
1TR6 (Germany)
- PBX BRI Interfaces:
NT/TE,PtP/PtMP
- Connectors:RS-232,
, LAN, ISDN Interface, SMA antenna (2), Sync In, Power supply
- FrequencyRanges:
900/1800 MHz or 850/1900 MHz
- SIM Card:
3V (Plug in, Small)
- Receiver
Sensitivity: -104dBm
- Input: 110VAC,
60Hz / 220VAC, 50Hz
- Output: 9VDC,
1.5Amp
- Dimensions:
(HxWxD)– 21.5x4.3x18.5cm/8.47x1.69x7.28 inches
- Weight: 0.96
kg / 2.12 lbs
- Operating
Temperature: 00C-450C / 320F-1130F
- Relative
Humidity: 5-95%
Download
Brochure (pdf)
Download
Manual (pdf)
Download
FAQ (pdf)
BUY
ONLINE |
|
